Ian Roussel walked up to the job expecting a big block, pipes out the side and a wild build. Then he saw what the customer had actually parked in the yard, and he said so out loud: “This really isn’t the project I had in mind for you.”

The owner, a man named Bill, had two old Chevrolet trucks waiting. “Neither are runners,” Ian learned. When he asked if they ran great when Bill parked them, Bill said yes, and Ian shot back, “What kind of used car salesman are you?”
“This One’s Pretty Hammered, Sir” Says The Builder Staring At Bill’s Old Green Pickup
The star of the yard was a 1954 Chevrolet pickup in faded green. Ian, of Full Custom Garage, admits the truck is beat up, but the grille caught his eye right away. “That’s one of my favorites,” he says.
Bill bought the pair together, and the second truck was meant to be a parts donor. He loved this one because it reminded him of the truck his family had when he was a kid on a chicken farm.
Ian’s first check is the one every builder makes: is it rotten on the inside? It was not, and he likes the green too. “It has a lot of appeal when it’s real patina,” he says.
Bill’s Strange Request: Keep The Faded Green Paint
Bill had never owned a truck with a patina finish, since his family always painted theirs. Now he wanted to try it. His rule for Ian was simple: do whatever you want, as long as the old green stays.
Ian agrees it is a strange request, but he can do it. The plan is a truck that looks like a worn-out farm hauler and drives like a modern machine.
A Chassis Swap That Turns A Farm Truck Into A “Race Car” Underneath
Ian says he could modify the old frame, but older trucks of this type never handled or stopped well. Instead he suggests a ready-made chassis from TCI, built for trucks of this era. Bill had not even known such a thing existed, and his answer was quick: “Sounds good. Do it.”
Ian visits the TCI shop in Southern California. Ed Moss started the company in 1974, and the visit came in its 45th year. Staff there tell him every chassis is made by hand, and each one gets an engine and transmission mocked up before it ships.
The crew says they build about a chassis and a half a day, or about seven per week. Brake lines are bent with a hand bender and marked with a Sharpie, and the company’s shop mustang has hit 162 mph going into turn one at Auto Club Speedway. Their motto: “If we can’t break it, you can’t break it.”
Ian leaves with a chassis already built with adjustable coilovers, four-wheel disc brakes and sway bars front and rear. “This looks like a race car,” he says.
Side By Side, The Old Truck Frame Looks Like A Relic
Back at Bill’s place, the body comes off the old frame, and Bill’s helper Martin lends a hand. Put next to each other, the two chassis are almost the same length from wheel to heel. But the new one is boxed and strong, while the old one has leaf springs and a straight front axle, a “purely utility truck setup.”
“I’ve Changed My Middle Name” Says Ian, Before Chopping The Roof
Ian wants to chop the top. The word makes Bill flinch, so Ian promises it will be subtle, and jokes that his middle name is now “Subtle.” Bill adds that he is stiff and cannot get in and out easily.
Ian says he wants the cab to look like a baseball cap pulled low, all business. He keeps the back window from getting smaller so Bill can still see in the rearview mirror, and he leaves the drip rails in place.
The chop ends up 1.5 inches in the front and 1 inch in the rear. When he lines up the pieces, the front and back do not match, so he angles the pillar instead of using the usual formula. The stock glass can still be trimmed to fit.
When Bill returns, he asks how much was taken off. Ian says an inch and a half. Bill guesses two inches. Both are right, because the roof is lower and raked. “It looks better than the factory,” Bill says. “That’s the way GM should have built it.”
“Sorry Ian, I Sold The Parts Truck” Leaves A Hole In The Plan
Ian had planned to patch the spare tire mount area using a fender section from the second truck. Then Bill drops the news: “I sold the parts truck. It’s gone, Ian.” A man had come with money and Bill took it.
So Ian formed the dome shape by hand, stretching the metal over a leather sandbag with plastic hammers, then smoothing it on an English wheel. The patch took a second try, a vertical slice like the one he used on the cab. He says it was the first time he had ever made a panel like that.
A Shiny Grille Fights The Old Paint, And Ian Finds A Middle Path
Bill brought in a reproduction chrome grille. The old grille was too smashed to use, but all that chrome next to the green looked too bright. So Ian straightened the original top bar and blended it with the new grille so the old paint wrapped around the chrome, like a lead sled.
The finished truck sits on 17-inch wheels with low profile tires. Ian kept the original steering wheel, a few small chrome pieces and the weld seams, which are painted only to stop rust.
A Windshield Pro With 50 Years Of Experience
For the curved glass, Ian called Paul of Paul’s All-Pro Glass. Paul has been at it for over 50 years and did his first chop car in 1962 in Compton. His son, Paul Jr., works with him, and has since he was 12.
Instead of the old fire method, Paul uses a heat gun. Ian misses the drama. “I still like lighting it on fire better,” he says. The windshield dropped in with a rope-in-the-channel rubber seal, and everything fit.
The First Drive: “Straight As A Die”
Bill calls the result a “road machine” and says old trucks go off the road when you hit the brakes, but this one is “straight as a die.” Ian, who is not easily impressed, said “Whoa, this is nice” on his first drive.
Its look is a mix of ranch dressing on a race car, as one of the crew puts it. The last word goes to the customer: “Hey, you want to race, Grandpa?” “Some kids never grow up.”
What Any Truck Owner Can Take From This Build
If you have an old truck that stops badly, a complete bolt-on chassis can solve what no amount of tuning will. The less you cut, the more of the original charm you keep, so decide first what you cannot live without. For Bill it was the green paint.
Also, check your parts source before you plan around it. Ian’s plan relied on a truck that Bill had sold to a stranger, and the fix took hours of hand work.
Finally, a pro who has done a job for 50 years can save you a broken windshield. Paying for one cut is cheaper than buying the glass twice.
More Stories You May Like
- He Bought Somebody Else’s Dream Truck, a Rust Free 1988 Toyota Pickup on 35 Inch Tires, and the Reason He Bought It Is a Story of Its Own
- Paying For Premium Gas When Your Engine Does Not Need It Wastes Money, And Premium Recommended Versus Premium Required In Your Owner’s Manual Are Not The Same Thing
- Pricey Option Packages And Trims Often Fail To Pay You Back When You Trade In, So Here Is What Tends To Hold Its Value And What Really Does Not
