A drag racer stopped by a classic car lot just to browse and walked out with a lesson about a part most car fans have never seen. The dealer asked him a simple question: have you ever seen a 12-bolt rear end made of aluminum?

The visitor, from the racing channel 187 Farms, answered honestly. “I don’t think so,” he said. The dealer grinned and said, “Want to see it?”
What came next surprised the whole crew. The part in question was sitting in an old Oldsmobile from Texas, and it turns out collectors are chasing them at very serious money.
“It Was An Experiment” In 1970, And The Part Came From Oldsmobile
The stop happened while the racing team was out running errands in Mustang, a town the host calls a huge car community. They had dropped off wheels and tires for alignment and balancing, stopped at the parts store, and then pulled in at Classic 405 Motors.
The owner there is a friend named Russ Root, a local racer who the host says knows every car for sale in the area. The host had come to look at a 1968 Camaro, or really a 1967, to study its interior and dash for the 68 he is building.
That is when Russ pulled out the surprise. The aluminum 12-bolt was an experiment, he said, and Oldsmobile offered it in 1970. It is still a 12-bolt differential with steel axle tubes like the regular version, but the entire center section is aluminum, not just the cover.
Only Around 300 Were Made, And They Trend Near $28,000 On Facebook Pages
Why is it so rare? The dealer had a simple answer. The aluminum center section could not take the abuse. “They put a sticky tire on it,” he said, and the part would crack.
That is why only around 300 were made, as the story goes. And the number that really got the host’s attention was the price. According to Russ, they have been trending on Facebook Oldsmobile pages at around $28,000 for one of those rear ends.
The punch line is that there is one in this car. The host’s reaction was a quick “Holy cow.”
A Rear End That Was Never Anyone’s Serious Hot Rod
Russ said the car was never anyone’s serious hot rod and never broken, but he wondered if the host had seen one. He added that many people put the aluminum differential cover on a regular 12-bolt, and while that works okay, it is not the same thing.
The group looked it over and agreed it is a neat piece. Someone remarked that it is probably not the greatest design, and it is easy to see why they broke. These cars made decent torque in their day, and Russ pointed out what happens when you add big tires and a burnout.
The warning from the dealer was blunt. If you hook up or bounce one of those on the street, “they’re done.” It is the kind of detail that only turns up when a car guy opens up an old Oldsmobile and shows you what is underneath.
A Racing Family’s Week: Burnout Trucks, A K5 And Halloween Pumpkins
The week had plenty more going on. The crew started with a trip to check on a K5 Blazer sitting in a yard, towing a trailer with them in case it would roll. The host says the truck was in better shape than the last one they looked at, with no rust on the doors.
They rolled the motor over by hand, checked compression, poured fuel and oil together into the carburetor and got the fuel pump working. The group was surprised at how quiet the engine ran, and at the sound of it, they said it needed only new glass packs. They also found wheels they liked, Detroit steels with cool center caps.
Another K5 had come home the day before, bought out of somebody’s yard for $1,500. It was last tagged in 2005, and when the crew put gas in the carburetor, it “busted right off.” The host said the Chevrolets are just out of control right now.
Then the pumpkin patch. With 100 degree weather delaying the plants, the host pollinated by hand every morning until the bees finally showed up. He has a prized pumpkin that is still growing, and he is aiming for Thanksgiving.
What To Know Before You Believe A Rare Part Story
The $28,000 figure is a good reminder that a number you see online is not the same as a price somebody actually paid. The dealer said the part is “trending” at that level on Facebook pages, which is a rough measure of asking prices rather than a sale.
- Ask for proof. Casting numbers, option codes and paperwork help show whether a rare part is real.
- Check for cracks. The dealer said the design is the reason so few survived, so a used one needs close inspection.
- Decide how you will use it. A rear end like this is a collector piece, not something to hammer with sticky tires.
- Compare several sources. Prices on social media pages swing wildly, so look at sold prices, not just listings.
For the host and his crew, the day was a reminder of why they love walking through a lot of old cars. You never know when a friendly dealer will show you something nobody has seen before, and the next one may be hiding in an old Oldsmobile near you.
More Stories You May Like
- Dealer Tells Owner A 2022 Range Rover With 70,000 Miles Needs A £17,000 Battery And Offers A Scrapyard Number, But Independent Mechanics Fix It For Around £2,600
- GM Gets Busted Selling Driver Data To Insurance Companies And Pays $220 Million, But Mechanic Says It Goes To Lawyers And The Government While 370,000 People Were Told They Weren’t Tracked
- Rare 2010 Camry Six Speed Manual Listed At $4,200 Comes With A Zip Tied Heat Shield And Fix A Flat In All Four Tires, And The Shopper Walks Away But It Sold Two Days Later
