The seller says this Camaro started life as a body on a rack in the back of a barn. After a build that included a 454 big-block and a fresh coat of Daytona Yellow, the convertible drew a high bid of $39,000 on Saturday, November 14, 2026, and the reserve was not met, so it did not sell.

Front of a bright yellow classic muscle car

The 1969 Chevrolet Camaro was offered by a private seller named dtappe66 in Fort Dodge, Iowa, on a Bring a Trailer listing. It pulled 27 bids from 17 bidders, 5,967 views and 840 watchers.

An Unfinished Project Bought In 2018

The seller acquired the Camaro in 2018 as an unfinished project. He explains that the original subframe, hood, engine and transmission had been taken and used to build a clone car, which left a bare body to start from.

From there, the work was extensive. He lists a full new floor with all the braces replaced, new rockers, and multiple patch panels including torque boxes and toe boards. The body was stripped to bare metal, epoxied and finished in multiple layers of clearcoat.

Daytona Yellow Paint With Black Stripes

A Fisher body tag decodes to a 1969 Camaro convertible assembled in Norwood, Ohio, with a first-week-of-May build date. It left the factory in Daytona Yellow with a black convertible top, and the seller repainted it in the factory shade after the metal repairs.

Black stripes, a replacement black top, chrome bumpers, a decklid spoiler and a 2-inch cowl-induction hood complete the look. The convertible top hydraulic cylinders and frame weatherstripping were replaced in February 2024, and the car rides on 15-inch Rally wheels with BFGoodrich Radial T/A white-letter tires.

A 454 Big-Block Said To Make 550 Horsepower On The Dyno

The star of the build is the 454ci V8, assembled around 2018 with an Eagle stroker kit, Mahle pistons, roller rockers, AFR cylinder heads, a Moroso oil pan and pump, a Quick Fuel 880-cfm carburetor and a Streetfire ignition. The seller says it calculates out to 489ci and was dyno-tuned at Grawmondbecks Competition Engines of Mason City, Iowa.

According to the seller, the last dyno pull showed 550 horsepower and 610 lb-ft of torque at 4400 rpm. Power goes through a three-speed automatic rebuilt in 2019 to a Ford 9-inch rear axle with a Trac-Lok differential and 3.70:1 gears, and Doug’s long-tube headers feed a dual exhaust with Flowmaster mufflers.

Traction bars from CalTracs help put it down, and the seller says all engine and body mounts are urethane.

Bidding Opened At $2,000 And Finished At $39,000

The first bid was $2,000 on November 8. The biggest single jump was $6,000, to $32,000, from a bidder named Scottcautos.

The finish was frantic, with 10 of the bids landing in the last five minutes. The final six went $36,000, $37,000, $37,500, $38,400, $38,650 and $39,000, the last from M-cal.

The Seller Listed What Still Needs Finishing

The seller was open about the loose ends. The factory radio and heater are removed, there is no heater core, fan or ducting, and the brakes are manual because the big valve covers and heads left no room for even a small vacuum booster. He suggests an electric booster could work.

The list continues. The windshield wiper switch is uninstalled, the wind-up windows need alignment, the under-dash courtesy lights and door-jamb switches are not installed, and the key notification buzzer is inoperative. The temperature and battery gauges do not work, and neither do several dash lights. Some fluid seepage shows at the transmission dipstick tube.

The seller’s own view, in reply to a commenter, was that a few small things need completing and tidying, and that the main thing the car brings is how fun it is to drive. He says he has never parked it without a huge smile.

Route 66 Fuel Stops And A Thank You To Bidders

Asked about the exhaust, the seller said it runs Flowmaster dual mufflers with an X crossover, and joked the car could go 1,850 miles, so owners should map out fuel stops on Route 66. He also said the car has a California vibe, and showed off custom plates.

In his last note he thanked everyone who followed along, asked questions and bid over the week. Bringing this Camaro back from obscurity and getting it on the road, he said, had been a great journey.

What To Ask Before Buying A Built Camaro

A car like this is part restoration and part custom build, and the price depends on how much the buyer values the work. The documentation matters here: the listing offers records and a clean Iowa title in the seller’s name, and the seller posted photos of the build process.

The odometer shows 53k miles, with about 2k added under the current owner. A buyer should ask for photos of the floor pans and subframe connection points, a dyno sheet and receipts, then budget for the unfinished items the seller listed.

The reserve was not met, which simply means the owner and the bidders did not agree on a number. A convertible with a big-block and fresh bodywork can find its buyer through a direct offer or a relist.

More Stories You May Like

Leave a Reply

Your email address will not be published. Required fields are marked *