If you drive a late-model Ram pickup, grab your keys and a pen. In just five weeks, Chrysler (FCA US) has issued three separate safety recalls covering up to 263,845 Ram 1500 and 2500 trucks, according to Yahoo Autos.

A white crew cab pickup truck on the road, representing the recalled Ram pickups.

The good news is that the report says there are zero reports of crashes or injuries tied to any of the three defects. The caution is that one 2026 Ram 1500 could land in more than one of these campaigns, so it pays to look up exactly which fixes apply to your truck.

The Backup Camera Screen That Goes Blank In Reverse

The biggest recall by far is a software problem. Under NHTSA Campaign Number 26V560, which is Chrysler recall number 83D, the automaker recalled 239,131 Ram 1500 trucks from the 2025 and 2026 model years. Affected trucks were built between October 6, 2023, and February 23, 2026.

The cause is a flawed radio software package. When the driver shifts into reverse, the infotainment screen may go blank instead of showing the rearview camera image.

Owner notifications for this recall began on September 24, and the fix is free. Owners can get an over-the-air software update delivered remotely, or they can book an appointment and have a dealer update the radio in person.

Then Came A Tire Pressure Sensor Problem On 16,385 Trucks

Ram followed with two fresh hardware recalls for the 2026 model year. Under NHTSA Campaign Number 26V623, the company recalled 16,385 of its 2026 Ram 1500 pickups for a sensor failure.

The internal tire pressure monitoring sensors may fail to detect low tire pressure and then fail to light up the dashboard warning. That puts the trucks out of compliance with Federal Motor Vehicle Safety Standard 138.

Owner notification letters began going out around October 27. Dealers will inspect the trucks and replace faulty sensors free of charge.

Heavy-Duty Owners Get A Stability Control Warning Of Their Own

Heavy-duty owners have their own defect. Under NHTSA Campaign Number 26V651, Ram recalled 8,329 of its 2026 Ram 2500 trucks.

A defective steering column control module can cause a sudden loss of Electronic Stability Control, which violates Federal Motor Vehicle Safety Standard 126. This action expands an earlier recall, 26V244, for the same module.

Owner letters for this stability control fix are scheduled to be mailed by November 24. Dealers will replace the module at no cost.

Add the three together, 239,131 plus 16,385 plus 8,329, and you reach the 263,845 figure.

The over-the-air option deserves a word of explanation for readers who have not used one. It works much like a phone update: the truck receives new software wirelessly, so there is no trip to the shop. For owners who live far from a dealer, that can be a real time-saver.

Still, plenty of folks prefer the in-person route. If you like to ask a technician questions and watch the work get done, booking the dealer appointment is perfectly fine. Either way, the fix costs nothing.

Why These Small Systems Matter More Than They Sound

A blank camera screen may sound like an annoyance, but anyone who has backed a big pickup out of a crowded parking lot knows how much drivers rely on that image. A grandchild’s bike, a shopping cart or a low post can be easy to miss in a vehicle this large.

Tire pressure warnings matter for similar reasons. A slow leak can hide for days, and the light is meant to catch it before it becomes a blowout or a ruined tire.

Electronic Stability Control is the system that helps keep a truck pointed where you want it when a sudden swerve or slippery road threatens to send it sideways. Losing it suddenly is exactly the kind of problem a recall is meant to catch.

Another point is the model-year overlap. The camera recall covers 2025 and 2026 Ram 1500s, while the tire sensor recall covers 2026 Ram 1500s. That is why Yahoo Autos warns that a single 2026 truck may be tangled up in several campaigns at once.

If that is your truck, do not assume that finishing one repair means you are done. Ask the service advisor to confirm that every open recall on your VIN is handled in one visit, which can save you a second trip.

How To Check Your Truck In Five Minutes

Do not wait for a letter. Owners who want to check their status before physical letters arrive can enter their 17-character VIN at NHTSA.gov/recalls or call Chrysler customer service directly at 1-800-853-1403.

  • Find your VIN on the driver’s side of the dashboard near the windshield, on the driver’s door jamb sticker, or on your registration and insurance card.
  • Enter all 17 characters at NHTSA.gov/recalls and read every open recall that shows up.
  • If the camera fix applies, choose the over-the-air update or schedule a dealer visit.
  • Keep your paperwork. Save any letter or confirmation you receive after the repair.
  • Recheck every few months. New recalls can be added at any time, and many trucks get more than one.

The takeaway is simple. All three fixes are free, and the lookup costs nothing. A few minutes at your kitchen table could save a headache in the driveway.

It is a good habit for any vehicle you own, not just a Ram. Recall checks are the cheapest piece of insurance a driver can buy.

More Stories You May Like

Leave a Reply

Your email address will not be published. Required fields are marked *